EUTM file information

018169514

December 18, 2019

Trademark Summary

The trademark application was filed by De Beer International Holding BV, a corporation established under the laws of the Kingdom of the Netherlands (the "Applicant"). The application was published for oppositions on January 15, 2020, and it was registered by office on May 21, 2020 without any oppositions.

The application was filed in Dutch (German was selected as the second language).

Change of name and address of the trademark registration was recorded on August 17, 2021.

Goods And Services

  • The mark was filed in class 6 with following description of goods:
    1. Metal hardware
    2. Building and construction materials and elements of metal
    3. Metals
    4. Clips of metal for cables and pipes
    5. Cables, wires and chains, of metal
    6. Cables of metal, non-electric
    7. Small items of metal hardware
    8. Building materials of metal
    9. Pipes, tubes and hoses, and fittings therefor, including valves, of metal
    10. Metal hoses for plumbing use
    11. Flexible tubes of metal
    12. Rings of metal
    13. Washers of metal
    14. Screws of metal
    15. Self-tapping metal screws
    16. Seals of metal for preventing leakage of gases
    17. Drain pipes of metal
    18. Elbow outlets of metal
    19. Drains made of metal
    20. Ducting conduit installations (Non-electric -) of metal
    21. Metal conduit
    22. Ducting conduits (Non-electric -) of metal
    23. Gutter pipes of metal
    24. Discharge pipes (Metal -) for building installations
    25. Guttering of metal for the dispersal of rain-water
    26. Drain plugs of metal
    27. Toilet paper dispensers, fixed, of metal
    28. Metal mirror hangers
    29. Hooks [metal hardware]
    30. Hooks (Door -) of metal
    31. Metal cup hooks
    32. Hooks of metal for use in building.
  • The mark was filed in class 11 with following description of goods:
    1. Sanitary installations, water supply and sanitation equipment
    2. Heating, ventilating, and air conditioning and purification equipment (ambient)
    3. Sanitary water conduit fittings
    4. Sanitary and bathroom installations and plumbing fixtures
    5. Bibcocks [plumbing fittings]
    6. Waste pipes for sanitary installations
    7. Spouts [plumbing fittings]
    8. Fittings for sanitary purposes
    9. Bathroom installations for sanitary purposes
    10. Pipes [parts of sanitary installations]
    11. Bushings being parts of sanitary installations
    12. Shower sprayers [plumbing fittings]
    13. Elbow bends (plastic -) for pipes [parts of sanitary installations]
    14. Cast iron parts for pipes [parts of sanitary installations]
    15. Sink strainers [plumbing fittings]
    16. Manually-operated plumbing valves
    17. Sanitary installations
    18. Valves [plumbing fittings]
    19. Valves (Level controlling -) being parts for sanitary installations
    20. Aerators for faucets [plumbing fittings]
    21. Faucet filters [plumbing fittings]
    22. Valves [faucets] being parts for sanitary installations
    23. Taps for sanitary installations
    24. Tub control valves [plumbing fittings]
    25. Shower control valves [plumbing fittings]
    26. Sanitary drain armatures for drip pipelines
    27. Sanitary drain armatures for bidets
    28. Sanitary drain armatures for baths
    29. Sanitary drain armatures for basins
    30. Sanitary drain armatures for showers
    31. Sanitary apparatus and installations
    32. Spray fittings [parts of sanitary installations]
    33. Sink sprayers [plumbing fittings]
    34. Cisterns being sanitary apparatus
    35. Valves being part of sanitary installations
    36. Water taps being parts of sanitary installations
    37. Sanitary water fittings
    38. Shower heads
    39. Shower taps
    40. Shower hoses
    41. Shower hoses for hand showers
    42. Plugs of metal for showers
    43. Water-saving showerheads
    44. Tub wastes
    45. Waste fittings for baths
    46. Waste assemblies for baths
    47. Waste assemblies for basins
    48. Water faucet spout
    49. Tub spouts
    50. Waste fittings for sanitary ware
    51. Fittings for the draining of water
    52. Fittings for flues
    53. Toilet tank balls
    54. Lavatory installations
    55. Water flushing installations
    56. Basin pillar taps
    57. Wash-hand basins [parts of sanitary installations].
  • The mark was filed in class 17 with following description of goods:
    1. Seals, sealants and fillers
    2. Flexible pipes, tubes, hoses, and fittings therefor, including valves, non-metallic
    3. Flexible hoses, not of metal
    4. Air conditioner hoses
    5. Hose pipes made of rubber
    6. Hose pipes made of plastic
    7. Industrial hoses of plastic
    8. Industrial hoses of rubber
    9. Flexible hoses made of polymeric materials
    10. Gaskets in the form of rings
    11. Washers of rubber [other than for water taps]
    12. Washers of rubber or vulcanized fibre
    13. Washers of rubber for forming tight joints [other than for water taps]
    14. Rings of synthetic rubber
    15. O-rings
    16. Rings of rubber for use as pipe connection seals
    17. Rings (Water-tight -)
    18. Seals (Non-metallic -) for gas pipes
    19. Stopping materials
    20. Packing material for forming seals
    21. Packing materials
    22. Waterproof membranes made of polymers
    23. Waterproof membranes of rubber
    24. Pipe joint sealant
    25. Sealing agents for use in the construction industry
    26. Sealants for buildings
    27. Thread (Screw -) sealing compounds
    28. Sealing profiles (Non-metallic -)
    29. Water-tight rings
    30. Stuffing rings (Non-metallic -)
    31. Watertight rings for plumbing pipes
    32. Sealing rings for hose fittings (Non-metallic -)
    33. Graphite packing for gaskets
    34. Non-metallic encapsulated seals
    35. Insulations with sealing functions for noise protection
    36. Gaskets for use as a fluid tight seal
    37. Rubber sealant for caulking and adhesive purposes
    38. Waterproof sealants
    39. Adhesive sealant compounds
    40. Insulating materials produced from plastics
    41. Flexible hose of plastics with wire inserts.
  • The mark was filed in class 35 with following description of goods:
    1. Business assistance, management and administrative services
    2. Advertising, marketing and promotional services
    3. Wholesale services in relation to sanitation equipment.
  • The mark was filed in class 40 with following description of goods:
    1. Custom 3D printing for others
    2. Treatment of plastic materials to produce plastic mouldings
    3. Treating [stamping] of metal
    4. Treating [shaping] of metal
    5. Treatment and processing of plastics
    6. Die casting
    7. Molding of plastic materials
    8. Providing information relating to the processing of plastics.